A90-PH
pH/ORP Controller

NT$100

  • Large TFT-LCD Display
  • User-friendly navigation system
  • 32 bits ARM-based MCU
  • Accurate Measuring Circuit
  • Stable and robust power module
  • General/Advanced password protection
  • Fine-tunable 0/4~20 mA output current
  • 4~20mA, modbus on RS485 module
  • IP65 Protection

     

 

SKU: N/A Category:
  • Large Graphic LCD Display

PH/ORP Controller

  • User-friendly navigation system

 

  • 32 bits ARM-based MCU

 

  • CE certification

 

  • IP65 Protection

Specification

Model :A90-PH-B / A90-PH-E / A90-PH-R / A90-PH-S
ParameterpHORPTemperature
Range-2.00~16.00 pH-1999~1999 mV-30.0~130.0 °C
Resolution0.01 pH1 mV0.1 °C
Accuracy±0.01 pH±0.1% F.S.±0.2 °C
Temp. SensorNTC10K, NTC30K, PTC1K or Manual adjustment
Temp. Comp.Automatic temperature compensation
Operating Temperaure0~50 °C
Storage Temperature-20~70 °C
Calibration ModeStandard solution, Manual solution, Process adjustment
Calibration PointSingle, Two or Three points
DisplayTFT-LCD display
LanguageEnglish / Simplified Chinese / Traditional Chinese
Relay SettingsTwo sets of Relays for High/Low point control, One set of Relay for timer settings
Max. 250 VAC 5A
Power Supply100V~240 VAC±10%,50/60 Hz,6W Max.
InstallationPanel/Wall/Pipe mounting
Dimensions144mm(H) × 144mm(W) × 115mm(D)
Cutout Dimensions138mm(H) × 138mm(W)
Weightapprox. 0.7 Kg
ProtectionIP65 (NEMA 4X)
Other functionsA90-PH-BA90-PH-EA90-PH-RA90-PH-S
Analog OutputTwo sets of isolated 0/4~20mA corresponding to measurement, max load 500 Ω-Two sets of isolated 0/4~20mA corresponding to measurement, max load 500 Ω
Measuring ChartMeasuring chart corresponded to 0/4~20mA output recorded for one hour (Statistical result with average, maximum and minimum values per minute)
A90-PH-E、A90-PH-S : Measuring chart corresponded to 0/4~20mA settings.
A90-PH-B、A90-PH-R : Measuring chart corresponded to display range.
Digital CommunicationMODBUS RTUMODBUS RTU
ClockThe time must be reset after power onThe time must be reset after power onClock is working when power offClock is working when power off