A60-XPA-FCL
Residual Chlorine/Ozone Controller

NT$100

  • Large TFT-LCD Display
  • User-friendly navigation system
  • 32 bits ARM-based MCU
  • Accurate Measuring Circuit
  • Stable and robust power module
  • General/Advanced password protection
  • Fine-tunable 0/4~20 mA output current
  • 4~20mA, modbus on RS485 module

     

 

Category:
  • Large Graphic LCD Display

  • User-friendly navigation system

 

 

  • 32 bits ARM-based MCU

 

  • CE certification

Specification

Model :A60-XPA-FCL
ParameterFree chlorineTemperature
Range*0~1/2/5/10/20/40/80/160 mg/L-30.0~130.0 °C
Resolution*0.01 mg/L0.1 °C
Accuracy*<5 mg/L: ±0.2 mg/L±0.2 °C
>5 mg/L: ±4% Reading
Temperature*NTC10K, NTC30K, PTC1K, Manual adjustment or Input from RS485
Temp. Comp.Automatic temperature compensation
pH Comp.If the change of sample pH is less than one unit, pH compensation is not necessary.
If the change of sample pH is larger than one unit, pH compensation is suggested.
Operating Temperaure0~50 °C
Storage Temperature-20~70 °C
Calibration ModeZero, Span, Process adjustment
DisplayTFT-LCD display
LanguageEnglish / Simplified Chinese / Traditional Chinese
Analog OutputTwo sets of isolated 0/4~20mA corresponding to measurement, max load 500 Ω
Relay SettingsTwo sets of Relays for High/Low point control, One set of Relay for timer settings
Max. 250 VAC 5A
Measuring ChartMeasuring chart corresponded to 0/4~20mA output recorded for one hour
(Statistical result with average, maximum and minimum values per minute)
Digital CommunicationMODBUS RTU
ClockClock is working when power off
Power Supply100V~240 VAC±10%,50/60 Hz,6W Max.
InstallationPanel mounting
Dimensions96mm(H) × 96mm(W) × 110mm(D)
Cutout Dimensions91.5mm(H) × 91.5mm(W)
Weightapprox. 0.4 Kg
*Depending on the sensors