A60-EC
COND/RES Controller

NT$100

  • Large TFT-LCD Display
  • User-friendly navigation system
  • 32 bits ARM-based MCU
  • Accurate Measuring Circuit
  • Stable and robust power module
  • General/Advanced password protection
  • Fine-tunable 0/4~20 mA output current
  • 4~20mA, modbus on RS485 module

     

 

SKU: N/A Category:
  • Large Graphic LCD Display

  • User-friendly navigation system

 

  • 32 bits ARM-based MCU

 

  • CE certification

Specification

Model :A60-EC-B / A60-EC-E / A60-EC-R / A60-EC-S
ParameterConductivityResistivitySalinityTDSTemperature
Range0 ~ 20/200/2000 μS/cm0 ~20.000~78 g/kg0~200,000PPM-30.0~130.0 °C
0~20/200 mS/cmMΩ-cm
Resolution0.01/0.1/1 μS/cm0.01/0.1/11 g/kg1 PPM0.1 °C
0.01/0.1/1 mS/cmMΩ-cm
Accuracy±0.1% F.S.±0.1% F.S.±1% F.S.±1% F.S.±0.2 °C
Temp. SensorNTC10K, NTC30K, PTC1K or Manual adjustment
Temp. Comp.Conductivity: Linear compensation (0~40%)Resistivity: Non-Linear compensation
Operating Temperaure0~50 °C
Storage Temperature-20~70 °C
Calibration ModeStandard solution calibration, Cell constant adjustment
DisplayTFT-LCD display
LanguageEnglish / Simplified Chinese / Traditional Chinese
Relay SettingsTwo sets of Relays for High/Low point control, One set of Relay for timer settings
Max. 250 VAC 5A
Power Supply100V~240 VAC±10%,50/60 Hz,6W Max.
InstallationPanel mounting
Dimensions96mm(H) × 96mm(W) × 110mm(D)
Cutout Dimensions91.5mm(H) × 91.5mm(W)
Weightapprox. 0.4 Kg
Other functionsA60-EC-BA60-EC-EA60-EC-RA60-EC-S
Analog OutputTwo sets of isolated 0/4~20mA corresponding to measurement, max load 500 ΩTwo sets of isolated 0/4~20mA corresponding to measurement, max load 500 Ω
Measuring ChartMeasuring chart corresponded to 0/4~20mA output recorded for one hour (Statistical result with average, maximum and minimum values per minute)
A60-EC-E、A60-EC-S : Measuring chart corresponded to 0/4~20mA settings.
A60-EC-B、A60-EC-R : Measuring chart corresponded to display range.
Digital Communication-MODBUS RTUMODBUS RTU
ClockThe time must be reset after power onThe time must be reset after power onClock is working when power offClock is working when power off